The ST-4000 by American Aerospace Corp. is a hand held instrument that is compact and portable. It measures 9.5" x 4" x 2" and has a detector that mounts to a Wand assembly for precision distance measuring. It is very user friendly and has one button operation. It has an LCD display that gives a reading in Effective Candela, and it auto ranges between 50 and 5000 Candela.

Taking accurate measurements is simplified with the ST-4000 because it counts and stores data for each individual flash and then tabulates the average reading for you, a task which has to be done manually with other testers.

The ST-4000 package consists of a handheld instrument, detector, wand assy., UV protective eyewear and operating manual in a protective case.
$4895.00

The Barfield Inc. TT1000A is a completely self-contained, battery powered, aircraft turbine temperature system tester capable of measuring system lead resistance, insulation, and performing indicator run-outs with a range up to 1000°C. The unit was specifically designed to meet all requirements for testing aircraft Chromel-Alumel (CH-AL) turbine temperature measuring systems and provides an accurate display of thermocouple outputs in degrees Celsius (C°). The TT1000A is engineered for maximum ease of operation and includes an automatic digital display which practically eliminates human error and reduces testing time to a minimum. The test leads incorporate automatic temperature compensation to remove induced voltage caused by a "Cold Junction" created when the test leads are attached to the aircraft. All of the features designed into the TT1000A have been added to reduce maintenance time and cost as well as provide a maintenance friendly tester for measuring and displaying resistance of thermocouple, thermocouple rings and system lead circuits. Simulates CH-AL thermocouple with or without simulated system lead resistance. Simulates thermocouple outputs and system lead resistances from 0 to 25. Measures and displays insulation resistance of system wiring and other components. Measures and displays values of CH-AL thermocouple in terms of degrees Celsius (C) temperature.

Features:

• High accuracy necessary for bench testing indicators
• Automatically compensates for ambient tempera-ture at test lead connection junction point or indicates this cold junction temperature
• Thermocouple and lead resistance measurements to 0.01 and insulation measurements up to to (2) megohms
• Large, 9mm (0.35") high character, 3-1/2 digit liquid crystal display (LCD) with pre-programmed legends
• Range: from 0 to 1000°C certified, -60 to 1160°C extended

Dimensions: 5"H x 8"W x 5.5"D (12.7cm x 20.3cm x 14cm); Weight: 4lbs (1.8kg)

Options:

• MOD B:Millivoltage doubler. For use on 16 systems
• 102-00902 Specially modified TT1000, adapter cable and carrying case for testing GE CF6-80 A, A1 and C2 engines.
• Specially modified TT1000, adapter cable and carrying case for testing GE CF6-6 and CF6-50 engines.

$4515.00

The Barfield Inc. TT1200A is specifically designed to accomplish all requirements for testing the aircraft Chromel-Alumel (K type) turbine temperature measuring systems. The tester can measure resistances down to 0.001 Ω, measure insulation up to 200 MΩ, perform indicator runouts with a resolution of .1°C or 1°C and a range of 1372°C, and can also display the equivalent °F or millivoltages and may be used as a master indicator as well. The TT1200A includes many features like: microprocessor based, backlit alphanumeric display, user prompts, °F and millivoltage display, temperature range to 1372°C, 4 resistance and 4 insulation ranges and power comes from common "C" batteries for all functions.

Features:

• Microprocessor based
• Calibration Date available from display with User Alerts to approaching Cal Date
• Backlit 16 Character Alphanumeric Display - With User Prompts
• True 4-Wire Resistance Measurements
• Has °C, °F, and equivalent millivoltage displays
• Powered from long lasting C cell batteries with Auto-Off feature to conserve batteries
• Timed measurement with Display Hold feature for Resistance and Insulation functions - No need to hold push button depressed

Temperature Measurement:

• Range: -200 to 1372 °C
• Accuracy: ± 0.3 °C (Typ at 25 °C)

Resistance Measurement:

• 20W: 0 - 19.999W 0.001W increments
• 200W: 0 - 199.99W 0.01W increments
• 2KW: 0 - 1.9999KW 0.1W increments
• 20KW: 0 - 19.999KW 1W increments
• Accuracy: ± 0.05 % of reading ± 2 counts

Insulation Measurement:

• 200KW:0 - 199.9KW 0.1KW increments
• 2MW: 0 - 1.999MW 1KW increments
• 20MW: 0 - 19.99MW 10KW increments
• 200MW: 0 - 199.9MW 1001KW increments
• Excitation: 45 VDC
• Accuracy: ± 5 % of reading ± 2 counts
• OPERATING TEMP: -10 to 50 °C

Dimensions: 7"H x 11"W x 10"D (17.8cm x 27.9cm x 25.4cm); Weight: 7.3lbs (3.3kg)
$5015.00

Key Features:

• Constant Current / Constant Potential Charge
• Dual Charge (Constant Current)
• Unique ReFLEX Charging Technique
• Exclusive DigiFLEX Analysis
• Reconditions NiCd Batteries

The Christie RF80-K is the worldwide industry standard for Aircraft Battery Charger/Analyzers. It charges all commonly used types of aircraft batteries such as nickel-cadmium, vented lead acid and sealed lead acid. This sophisticated instrument also analyzes batteries to determine their condition, or useful power capacity. The RF80-K has many user-friendly features, including automatic operation, digital timers and displays, a well organized front panel and simple accessible controls. The RF80-K is truly an industry standard.
$11580.00

Battery Reconditioning:
CASP/2000 employs Christie's exclusive ReFLEX current cycling to rejuvenate badly faded NiCd batteries. This process substantially eliminates battery memory and actually restores the battery to a serviceable condition, often when it will no longer hold a charge. The same process is used to maintain NiCd's and prevent deterioration. This outstanding capability by itself justifies the use of CASP/2000.

Battery Charging:
CASP/2000 charges any type of rechargeable battery. Up to six randomly intermixed batteries can be connected at the same time and charged sequentially. Charging is automatic. Each battery receives precisely the type and amount of charging it requires: ReFLEX, constant current, two-level constant current or constant potential. Optimized, fast charging or slow "trickle" charging can be selected, and batteries can be discharged for storage or shipment.

Battery Recognition:
CASP/2000 automatically recognizes the batteries it is processing by the types of cables used for interconnection.

Battery Analysis:
CASP/2000 analyzes the condition of any battery connected to the system. The battery can be analyzed in both charge and discharge modes, to determine the charge energy required and the useful ampere-hours in the battery.
$10070.00

The CASP/1500 is a versatile, user-friendly, microprocessor-based, precision instrument for keeping rechargeable batteries of all types ready and able to deliver their rated ampere-hours. All the functions necessary for achieving this performance level are provided by the CASP/1500, including appropriate charging, battery condition analysis and battery reconditioning.
$8420.00

Key Features:

• Constant Current Charge
• Dual Charge (Constant Current)
• Constant Potential Charge
• Constant Current Discharge

The Universal 60 is Christie Electric's first product in our ProEase family of models for professional applications designed for Ease-of-Use. This battery charger/analyzer provides economical and uncomplicated maintenance for any battery that can be charged using constant current ro constant potential, including vented nickel-cadmium and vented or sealed lead acid aircraft batteries.
$12125.00

The CASP 1200 is a cost-effective universal battery support system, by Christie. A microprocessor-based precision instrument for maintaining any rechargeable battery at the peak of its performance. Through the systematic use of CASP/1200, battery operated equipment becomes more reliable, safer and far more cost-effective. In short, CASP/1200 optimizes the effectiveness of batteries as a component of electronic systems.
$5905.00

This Mitutoyo Inc. Digital Protractor presents inclination values on an easy-to-read liquid crystal display. The measurements are generated by an electronic gravity sensor and processed by the latest low-power electronic circuit technology.

Features:

• Full 360 range (90 x 4)
• Machined aluminum frame
• Alternate reference (zero)
• Reading hold
• Simple calibration requiring no special fixtures
• Display remains upright to view at all angles
• Range: 360° (90°x4)
• Resolution: 0.1°
• Accuracy: ±0.1°Level ±10°, Plumb, ±0.2° Maximum error
• Repeatability: ±0.1°
• Cross Axis Error: Minimal
• Battery Life: 500 Hrs. Standard 9-Volt Battery
• Temperature Operation: -5°C to 50°C (23° to 122°F)
• Storage: -20°C to 65°C (-4°F to 149°F)
• Weight: 289g (10.2oz.)
• Output: N/A
• Standard Accessories: Pouch ±Represents clockwise or counter-clockwise slope.

$380.00