For the shop, to pick up small parts, start screws, to get into hard to reach places, fastening springs. Numerous uses.

Kit Contains:

• 6-1/2" Self Closing, Blunt Points (Serrated)
• 6-1/2" Slide Lock, Smooth Points
• 4-1/2" Fine Points

$28.50

Hunter Spring Static Grounding/Bonding Reels can be used when combustible materials are transferred between carriers. For use where a discharge of static electricity could cause a spark and subsequent explosion, such as bulk stations, airports, terminals and refineries.

Built for reliable performance, Rota-Reel grounding reels feature a SPIR'ATOR® prestressed spiral spring for easy extension and automatic retraction. A pawl and ratchet permits you to lock the cable at any desired length. A simple tug on the cable unlocks the reel for smooth, steady retraction. The standard termination is a 100 amp alligator clamp.

A ball stop on the cable assembly keeps the cable end within easy reach. Rota-Reel grounding reels feature a galvanized steel mounting base for installation in any position and a sturdy steel housing with a weather resistant finish to protect the reel from corrosion.

NOTE: Grounding and bonding during fuel handling operations can, at best, only prevent external electrical discharge in the presence of fuel vapor. It does not remove bulk charges from the fuel and cannot prevent internal explosions. To minimize the risk, the conductivity of the fuel should be increased.
$258.50

The new patent pending Start Pac 2300QC has a separate removable battery that can be changed in 15 seconds. This feature allows the user to change batteries in the field without needing to send the Start Pac back to the shop or Manufacturer.

The Model 2300QC will start turbine or piston engines up to 1500 horse power and give four to six starts between charges. This unit has a dual redundant 4 amp chargers.. When plugged into an AC source, 8 amps at 28VDC, is available for maintenance functions without depleting the batteries. Recharge time is approximately 3-1/2 hours. Certain aircraft will allow the ship's generator to back charge a GPU. In this manner, Start Pac can be recharged in the field without an AC source indefinitely.

Features:

• 26 AMP hours @ 10 Hour Rate
• 2300 AMPS Peak Current
• Available with separate trolley
• 19.5' long, 7.5" wide, 11-3/8" high
• 69 LBS. Complete
• All In One air portable/carry-on START PAC with built in chargers, power plug and cables
• Units are 24/26 VDC output, with universal chargers that will accept 90-240 VAC 50/60 hertz

$2687.00

The new patent pending Start Pac 1628QC has a separate removable battery that can be changed in 15 seconds. This feature allows the user to change batteries in the field without needing to send the Start Pac back to the shop or Manufacturer.

The 1628QC will give a quicker more robust start due to its higher voltage. This unit utilizes dual 3.5 amp chargers for reliability with a recharge time of 2.5 hours. These units will give three to five starts between charges.

Due to their lightweight and portability, these packs are especially suited for use in remote locations. Certain aircraft will allow the ship's generator to back charge a GPU. In this manner, Start Pac can be recharged in the field without an AC source indefinitely. This unit will start turbine engines up to 800 horsepower.

Features:

• 16 AMP hours @ 10 Amp Hour Rate
• 1400 AMPS Peak Current
• 19.5' long, 7.5" wide, 9.75" high
• 54 LBS. Complete
• All In One air portable/carry-on START PAC complete with built in chargers, power plug and cables
• Units are 28.5 VDC output, with universal chargers that will accept 90-240 VAC 50/60 hertz

$2215.00

(200-20R pictured)
Hunter Spring Static Grounding/Bonding Reels can be used when combustible materials are transferred between carriers. For use where a discharge of static electricity could cause a spark and subsequent explosion, such as bulk stations, airports, terminals and refineries.

Built for reliable performance, Rota-Reel grounding reels feature a SPIR'ATOR® prestressed spiral spring for easy extension and automatic retraction. A pawl and ratchet permits you to lock the cable at any desired length. A simple tug on the cable unlocks the reel for smooth, steady retraction. The standard termination is a 100 amp alligator clamp.

A ball stop on the cable assembly keeps the cable end within easy reach. Rota-Reel grounding reels feature a galvanized steel mounting base for installation in any position and a sturdy steel housing with a weather resistant finish to protect the reel from corrosion.

NOTE: Grounding and bonding during fuel handling operations can, at best, only prevent external electrical discharge in the presence of fuel vapor. It does not remove bulk charges from the fuel and cannot prevent internal explosions. To minimize the risk, the conductivity of the fuel should be increased.
$283.00

148 piece CooperTools tool set. Sockets, wrenches, allen wrenches, pliers more!

Great spare set of tools for travel, or to keep in a shop or airport vehicle, or for shop/building maintenance, or when a customer asks to "borrow a wrench" you don't have to loan one of your good ones!

Or Sell these in your Pilot Shop!

Contains all the tools needed for most industrial applications, including 1/4", 3/8", and 1/2" quick-release ratcheting drives, with a wide selection of standard and deep sockets in the most common SAE and metric sizes.

• Features 72-tooth ratchet drives for a 5° swing that's perfect in tight spaces.
• 3/8" drive 12-point sockets to increase fastener contact area for maximum torque.
• Durable storage cases have raised-letter ID for each tool location, so they'll stay organized, plus tools lock securely in place, a true benefit for work vehicles or other places where tools get knocked around.
• All tools in this set meet stringent new ANSI and ASME specifications

Money back guarantee! If not completely satisfied may be returned in "as new condition" for full refund.
$124.00

Key Features:

• Closed case 170 Piece Tool Set - Cresent
• Type of Case: Plastic,Cathedral Door w/Hndl
• Catalog Numbers: Mixed SAE and Metric
• Packaging: Industrial Box/Carton

$135.50

Add-A-Nut makes installing Riv Nuts and Nut Serts an easy task. The Hp-2 kit comes complete with all the necessary items needed to install Riv Nuts and Nut Serts sizes 6-32, 8-32 and 10-32 in a high impact plastic storage case. Replacement parts for the HP-2 are available.
$235.00

The contents of this kit consists of the latest solder/desolder products available. Each individule item has been carefully selected to fill your rework needs. Packaged in a durable plastic case, the SMD 2000 contains the following:

• 4-1/2 ft. of CHIP QUIK Removal Alloy SMD with instructions
• 1 cc syringe of no-clean 63/67 solder/desolder rework paste flux (w/ nozzle & cap)
• Solder 3 ft. 63/67 2% silver 0.031"
• 5 cc container w/applicator of liquid flux remover/cleaner (non flammable)
• Probe Kit — 4 stainless steel dental picks for SMD removal & placement
• Solder Wick — no clean / 5 ft.
• Handi Vac — SMD pick & place tool w/tips
• Acid Brush — qty. of 2
• Precision Tweezers — for SMD removal & placement
• Cleaning Wipers — 4" x 4" tight weave, low lint qty. of 6 (for cleaning PC board)
• Swabs — double ended qty. of 10 (for PC board clean up)
• Alcohol pads — qty. of 6 (for PC board clean up)
• CHIP QUIK SMD removal & clean up instructions

$169.00

The MS-2000(M) meets all military specifications, including MIL-L-38217D, and CID A-A-59176, but it has many improved life-saving features.

• Shield extends/retracts for omni- or uni-directional visibility
• Waterproof down to 50ft (15.3m); 200ft diver version available
• IR filter blocks all visible light (lets through only IR light)
• Raised polarity indicators allow correct battery replacement in low or no visibility conditions
• New braided steel retainer keeps battery door from being lost
• Operates on 2 standard alkaline AA batteries - disposal causes no environmental impact
• For extreme cold environments or long term storage, use 2 common lithium batteries
• Blue filter distinguishes strobe from ground fire when in place

The MS-2000(M) is compact, lightweight and waterproof. The white strobe emits 250,000 peak lumens, but also allows the use of a blue filtered light. There is also an Infra-Red filter that allows the strobe to be seen only by I.R. equipment. The unit will run for a minimum of 8 hrs. on 2AA-cell batteries.
$194.50

The MS-2000(M) meets all military specifications, including MIL-L-38217D, and CID A-A-59176, but it has many improved life-saving features.

• Shield extends/retracts for omni- or uni-directional visibility
• Waterproof down to 50ft (15.3m); 200ft diver version available
• IR filter blocks all visible light (lets through only IR light)
• Raised polarity indicators allow correct battery replacement in low or no visibility conditions
• New braided steel retainer keeps battery door from being lost
• Operates on 2 standard alkaline AA batteries - disposal causes no environmental impact
• For extreme cold environments or long term storage, use 2 common lithium batteries
• Blue filter distinguishes strobe from ground fire when in place

The MS-2000(M) is compact, lightweight and waterproof. The white strobe emits 250,000 peak lumens, but also allows the use of a blue filtered light. There is also an Infra-Red filter that allows the strobe to be seen only by I.R. equipment. The unit will run for a minimum of 8 hrs. on 2AA-cell batteries.
$155.00

These GPU'S are designed for ground use to perform starting and maintenance functions. This unit can be used in remote ramp locations using battery power alone and give extended time for maintenance checkout. When connected to AC power, the depleted batteries can be charged in less than two hours with the built in power supply/battery charger.
$6680.00

These GPU'S are designed for ground use to perform starting and maintenance functions. This unit can be used in remote ramp locations using battery power alone and give extended time for maintenance checkout. When connected to AC power, the depleted batteries can be charged in less than two hours with the built in power supply/battery charger.
$7480.00

The HL-X Headlite may be mounted on most hard hats or comfortably work directly on the head. The "Cool Max" liner material provides a soft cushion for comfort and to absorb moisture. The chemically resistant, polypropylene case is lightweight and durable. The light with its adjustable strap and "direct beam" design makes it ideal for hand-free use in confined spaces. Uses (4) AA alkaline batteries (not included) and PR12 or PR 15 bulbs.
Call Aero Source Global, Inc. for availability at (714) 783-7623
$44.50

GC Electronics dual range heat gun for use in heating shrink tube and drying coatings, adhesives, etc. Low temperature range setting produces a nominal 700 F (2,000 BTU's), high range 975 F(4,000 BTU's). Maximum setting draws 10 Amps, low heat draws 5 Amps. Lightweight design that is easy to handle. Designed so that it may be put down to cool without a special holder.
$64.00

The same flux used in the SMD 1 kit. Ideal for all rework.